Punch Set with 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in Hole Punch Tips EDPCH0001

Where Is a Hole Punch Set Used?

A hole punch set is used for preparing holes before snap, eyelet, rivet, belt, bag, shoe, fabric and leather accessory applications.

Opening the correct hole diameter before fastening helps the accessory sit more properly on the surface.

5 Different Sizes

The set includes 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in punch tips.

The hole size should be selected according to the body diameter of the accessory being applied. A narrow hole can make fastening difficult, while an oversized hole can cause a loose fit.

Use Before Snaps, Eyelets and Rivets

This product is used for opening holes before snap, eyelet and rivet installation. A compatible setting die is still required for the actual fastening step.

For eyelet applications, hole diameter, eyelet inner diameter and setting die should be selected together.

Use for Belts, Bags and Shoes

It can be used for belt holes, bag strap connections, strap openings, shoe lace holes and decorative accessory holes.

Marking the punching point before use helps improve alignment and final product appearance.

Use on Fabric and Leather

It can be used on fabric, canvas, faux leather, thin leather, felt and similar surfaces. Material thickness and hardness can affect the punching result.

For thick or multi-layer materials, testing on the real surface before production helps achieve a better result.

Knurled Metal Handle and Steel Tips

The knurled metal handle helps improve hand grip. Interchangeable steel punch tips allow use with different hole diameters.

The required punch tip is attached to the handle according to the hole size needed.

Product Clarification

This product is a hole punch set. It is not an eyelet, snap or rivet setting die.

After the hole is opened, the selected accessory should be installed with its compatible die, press or fastening tool.

Sales Content

The set includes 1 knurled metal handle and 5 interchangeable punch tips. The tip sizes are 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in.

Common Questions Before Ordering

Which sizes are included?

The set includes 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in punch tips.

What is this product used for?

It is used for opening holes before snap, eyelet, rivet, belt, bag, shoe, fabric and leather applications.

Can it set eyelets?

This product does not set eyelets; it opens the hole before eyelet setting.

Can it be used for snaps?

Yes. It can be used for preparing a suitable hole before snap fastener installation.

Is it suitable for rivets?

Yes. It can be used for hole preparation before rivet setting.

Can it punch belt holes?

Yes. It can be used for belt hole applications when the correct size is selected.

Can it be used for bags and shoes?

Yes. It can be used for bag, shoe and similar accessory applications.

Can it be used on leather?

It can be used on faux leather, thin leather and similar suitable surfaces.

Are the tips interchangeable?

Yes. The 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in tips can be changed according to need.

Is a press machine included?

No. This product is a hole punch set; a press machine is not included.