Menu
Menu
Your Cart

20 mm / 0.79 in Professional Circular Punch for Workshop Materials PDV00200DEL

20 mm / 0.79 in Large-Diameter Circular Cutting

Press Capacity, Material Use and Size Selection

20 mm (0.79 in) circular hole cutter offers a practical cutting size for compatible fabric and leather projects. Review the cut center and available edge clearance and confirm machine fit before buying.

459.00₺
612.00₺
Ex Tax: 382.50₺
  • Stock Quantity: In Stock
  • Model: PDV00200DEL

Product Reviews

No reviews yet. Be the first to write a review!

Q&A

Total Questions 0 Answered 0 Unanswered 0

20 mm / 0.79 in Large-Diameter Hole Cutter

20 mm / 0.79 in professional circular punch prepares a repeatable circular opening in compatible workshop materials. The listed size is the actual cutting diameter. It is a cutting tool, not a hardware-setting die.

Select by the real opening required by the production step or hardware. A trade number, outer diameter or visual similarity is not enough to confirm the correct hole size.

Large-Diameter Cutting System

The tool follows the large cutting-family geometry with a cutting blade, guide/mapa and Polyemit support. Presses and hardware-setting dies are separate.

Typical Applications

  • Fabric, leather and synthetic leather
  • Canvas, tarpaulin and awning material
  • Bag, belt and workshop accessory production
  • Pre-punching before compatible hardware installation
  • Sampling, prototypes and repeat production

Cutting vs. Setting

The cutter removes material; the setting die secures the hardware. After a 20 mm / 0.79 in opening is prepared, use the setting tool matched to the selected eyelet, rivet or other component.

Press Capacity and Working Height

Large cutters may need more controlled press force than small punches because a longer cutting edge contacts the material. Verify connection type, working height and press capacity before using manual, impact, electric or pneumatic equipment.

Material Thickness and Sample Cuts

Thin fabric, dense leather, multilayer canvas and coated tarpaulin can require different force. Thickness, stiffness, stretch and lower support affect edge quality. Test the real production material before repeat work.

Cut Quality and Tool Care

  • Do not strike the cutting edge against bare metal.
  • Keep the Polyemit support clean and level.
  • Align the cutter squarely to the press table.
  • Use controlled pressure on thick materials.
  • Inspect the edge if incomplete cuts appear.

General Hole Cutting vs. Covered-Button Use

This listing is organized by actual hole diameter. The same physical cutter may also prepare fabric for a covered-button system when that relationship is verified; covered-button listings separately show ligne size and finished button diameter.

How to Select the Correct Size

If the application needs a 20 mm / 0.79 in opening, this is the matching cutter diameter. Hardware body shape, barrel height and washer structure remain separate considerations for the setting stage.

Before Ordering

  • Required opening: 20 mm / 0.79 in
  • Material thickness and layer count
  • Press connection and working height
  • Available press force
  • Separate setting die when hardware is installed

Frequently Asked Questions

What diameter does this cutter produce?

The actual hole/cut diameter is 20 mm / 0.79 in.

Does it install hardware?

No. It prepares the opening only; setting hardware requires a separate die.

Which materials can it cut?

Compatible fabric, leather, canvas, tarpaulin, cardboard and technical textiles depending on thickness.

What should be checked before using a press?

Verify physical connection, working height and available press force.

Can the same cutter be used for covered-button fabric preparation?

Only when the physical cutter is verified for the relevant covered-button system.

Included Anvil for 20 mm Hole Cutting

The 20 mm (0.79 in) hole punch includes a polyamide anvil. It is designed for the M00101 press. Check the press attachment and material before cutting; this tool does not set the accessory.

Product Information
Compatible Product GroupApplications Requiring a 20 mm / 0.79 in Hole
Drilling Diameter20 mm / 0.79 in
ModelHole Cutter No. 20
NotesNot a setting die; hole punching/cutting tool only
Transaction TypeHole Punching / Circular Cutting
Usage SurfaceLeather / Fabric / Canvas / Tarpaulin / Cardboard / Technical Textiles
Sales MethodCutting Blade + Guide/Mapa + Polyemit Support
Working Method / Press CompatibilityManual / Impact / Electric / Pneumatic Press - verify physical connection
Product TypeHole Cutter / Punching Die
SIZE / DIMENSION
Size mm / Ligne20 mm / No. 20
Size / Number20 mm / 0.79 in
MATERIAL
MaterialSteel
Purpose
PurposeHole Punching / Circular Cutting / Pre-Installation Preparation

Dear Customer,

We aim to ensure you have the best experience with your order process. Please note that the prices listed apply to standard color options. If you prefer different colors, enamel finishes, or stone embellishments, a price adjustment will be made based on the cost of the additional materials.

The quoted price applies to the unit shown next to the product (package, gross, meter, or piece). For retail orders, please keep the following rules in mind:

  1. Piece Sales: If the product is sold by the piece and your order is for 500 pieces or less, we will ship from available stock colors. To access a wider range of options, we kindly ask that you meet the minimum quantity requirement listed on the product page.

  2. Package or Gross Sales: If the product is sold by package or gross, for 1 package or gross or less, we will also ship from available stock colors.

For both scenarios, our team will contact you via phone or other communication channels to confirm your color and quantity preferences.

For orders of 5000 pieces or more, we can apply your preferred custom color. Please note that there may be a delay of 3-4 business days for production, depending on the product type.

For large orders of 20,000 pieces or more, please contact us for special pricing.

If you’re interested in custom colors, enamel finishes, or stone-embellished products outside of our standard color options, please refer to the Special Coating Colors section or reach out to us directly.

For bulk orders, we offer customization with your company’s logo or tailored designs. Please contact us to discuss your unique needs.

Important Note: Due to lighting variations during photography, there may be slight differences in color between the product images and the actual product.

For international orders, DHL shipping fees will apply. Please contact us for details regarding shipping costs and further information.

Domestic Delivery

  • Your orders will be delivered by the shipping company on the estimated delivery date provided.
  • Shipping fees are determined based on agreements made with the shipping companies.
  • Orders placed before 3 PM will be dispatched on the same day.

Returns

  • You can return any purchased item, provided it meets our return policy criteria, within 15 days of the delivery date. Please note, the shipping cost for returns is the responsibility of the customer.
  • For more detailed information regarding delivery and returns, please visit our Frequently Asked Questions (FAQ) page.

International Shipping Information

We proudly offer worldwide shipping for our products.

Payment Methods:

  • We cater to both retail and wholesale customers. Prices are available in Turkish Lira (TRY), US Dollars (USD), and Euros (EUR).
  • Currently, we accept credit card payments for all international transactions.
  • Please note, failing to pay via credit card may delay your order processing, as we will need to receive payment and issue an invoice before shipping your order.

Shipping Costs:

  • Shipping fees are calculated in real-time using DHL’s international shipping calculator, based on your selected shipping method, location, and the weight of your order. You will be able to review the exact shipping costs after entering your personal information at checkout, before completing the purchase.

Customs and Duties:

  • Please be aware that customs duties and taxes may apply to your order, depending on your country’s regulations. Our system cannot calculate these charges.

Shipping Methods:

  • We offer Yurtiçi Cargo for domestic shipments within Turkey and DHL Express for international deliveries. If you are a business requiring additional options through DHL, please contact our Customer Service team for assistance.
  • DHL services may have country-specific weight and size restrictions, which our system may not always detect. We recommend keeping an eye on your email for updates regarding your order, especially for wholesale purchases.

Important Notes:

  • Ensure you select the appropriate shipping method for your location. If you are located outside the US or the European Union but choose shipping options meant for these regions, the correct shipping fees will be calculated and shown at checkout.
  • Once the order has been dispatched, E-Buttons.com is not responsible for any delays or losses related to international shipping.
  • While DHL Express will expedite your package to the nearest customs facility, we have no control over how long it will take for your package to reach you after leaving Turkey.

You can track your package using the DHL Tracking Code provided after shipping. Please note that if the package is not officially marked as lost or damaged according to your country’s postal regulations, we are unable to resend it. In such cases, we will initiate an insurance claim, and only after the claim is approved will the products be re-sent.