8 mm / 0.31 in Zamak Double-Loop Bra Strap Slider is a Zamak adjustment component with a double-loop body geometry.
Product function
This double-loop slider is Zamak hardware used to adjust usable strap length. Its main difference from the standard slider is the body formed by two connected loops, which creates a different strap-routing path. Selection should follow the actual production tape and approved construction.
For production, This double-loop slider is Zamak hardware used to adjust usable strap length. Its main difference from the standard slider is the body formed by two connected loops, which creates a different strap-routing path. Selection should follow the actual production tape and approved construction.
Difference from the standard slider
The standard slider uses a conventional frame. The double-loop version uses two connected openings and therefore a different routing geometry. This is a structural and visual difference, not a verified claim that one design is stronger. Test both with the real tape if the design team is comparing alternatives.
For production, The standard slider uses a conventional frame. The double-loop version uses two connected openings and therefore a different routing geometry. This is a structural and visual difference, not a verified claim that one design is stronger. Test both with the real tape if the design team is comparing alternatives.
8 mm / 0.31 in size family
The nominal size identifies the hardware family. Finished strap width, thickness, elasticity and edge construction can vary. Compatibility should not be assumed from the size label alone. The double-loop structure makes correct routing especially important.
For production, The nominal size identifies the hardware family. Finished strap width, thickness, elasticity and edge construction can vary. Compatibility should not be assumed from the size label alone. The double-loop structure makes correct routing especially important.
Zamak material
The product is classified as Zamak. Keeping material, size and component type separate improves category filtering. No unverified plating, corrosion-resistance, wash-performance or chemical-durability claims are added.
For production, The product is classified as Zamak. Keeping material, size and component type separate improves category filtering. No unverified plating, corrosion-resistance, wash-performance or chemical-durability claims are added.
Applications
The slider can be considered for bras, bralettes, bikinis, swimwear, bodysuits, nightwear and similar narrow-strap garments. Whether the double-loop form suits the design should be decided on the approved sample.
For production, The slider can be considered for bras, bralettes, bikinis, swimwear, bodysuits, nightwear and similar narrow-strap garments. Whether the double-loop form suits the design should be decided on the approved sample.
Use with rings and sets
The double-loop slider adjusts strap length; a ring creates a connection or direction-change point. Other hardware may accompany it depending on the garment. Set products based on the standard slider should not be treated as identical to this double-loop model.
For production, The double-loop slider adjusts strap length; a ring creates a connection or direction-change point. Other hardware may accompany it depending on the garment. Set products based on the standard slider should not be treated as identical to this double-loop model.
Live related products
Use the live Bra Rings, Hooks and Strap Adjustment Buckles category for comparison. The live 8 mm / 0.31 in standard slider, ring and 2-piece set help explain how the double-loop model differs from other family members.
For production, Use the live Bra Rings, Hooks and Strap Adjustment Buckles category for comparison. The live 8 mm / 0.31 in standard slider, ring and 2-piece set help explain how the double-loop model differs from other family members.
Sample testing
Route the real production tape through both loops in the intended direction. Check for binding, excessive play, rotation or folding. Because routing differs from the standard slider, physical sample approval is particularly important.
For production, Route the real production tape through both loops in the intended direction. Check for binding, excessive play, rotation or folding. Because routing differs from the standard slider, physical sample approval is particularly important.
Technical sheet
Record model PIR711008Z, component type Double-Loop Bra Strap Slider, 8 mm / 0.31 in size, Zamak material and package content. The strap-routing direction should be supported by the approved sample or production illustration.
For production, Record model PIR711008Z, component type Double-Loop Bra Strap Slider, 8 mm / 0.31 in size, Zamak material and package content. The strap-routing direction should be supported by the approved sample or production illustration.
Bulk production
Compare initial completed straps with the approved double-loop sample. Tape routing, adjustment movement and nearby stitching should remain consistent. Use model code and product image to reduce the risk of mixing it with the standard slider.
For production, Compare initial completed straps with the approved double-loop sample. Tape routing, adjustment movement and nearby stitching should remain consistent. Use model code and product image to reduce the risk of mixing it with the standard slider.
Package content and minimum order
One sales unit contains one double-loop slider. The minimum order is 500 pieces. Package content and minimum order are separate concepts, and production planning should reflect the number of sliders used per finished garment.
For production, One sales unit contains one double-loop slider. The minimum order is 500 pieces. Package content and minimum order are separate concepts, and production planning should reflect the number of sliders used per finished garment.
Purchasing checks
Before ordering, verify model PIR711008Z, double-loop component type, 8 mm / 0.31 in size and Zamak material. Distinguish it from the standard slider by model code and body geometry, not visual similarity alone.
For production, Before ordering, verify model PIR711008Z, double-loop component type, 8 mm / 0.31 in size and Zamak material. Distinguish it from the standard slider by model code and body geometry, not visual similarity alone.
Warehouse management
Standard and double-loop sliders should remain under separate model codes even when they share the same nominal size. Shelf labels should show both model code and component type.
For production, Standard and double-loop sliders should remain under separate model codes even when they share the same nominal size. Shelf labels should show both model code and component type.
Signs of a mismatch
If the tape is difficult to route, folds unexpectedly, adjustment behaves differently than intended or the finished appearance does not match the design, review routing and component selection.
For production, If the tape is difficult to route, folds unexpectedly, adjustment behaves differently than intended or the finished appearance does not match the design, review routing and component selection.
Quality control
Check the double-loop body for visible deformation, confirm that both openings are used in the approved direction and compare completed strap behavior with the reference sample.
For production, Check the double-loop body for visible deformation, confirm that both openings are used in the approved direction and compare completed strap behavior with the reference sample.
Production planning
If several garment sizes or styles use the same double-loop slider, demand can be consolidated. It should not be merged with standard-slider demand as the same inventory item.
For production, If several garment sizes or styles use the same double-loop slider, demand can be consolidated. It should not be merged with standard-slider demand as the same inventory item.
Repeat orders
A generic phrase such as 8 mm slider is not enough. Use model PIR711008Z together with Double-Loop Bra Strap Slider to prevent confusion with the standard model.
For production, A generic phrase such as 8 mm slider is not enough. Use model PIR711008Z together with Double-Loop Bra Strap Slider to prevent confusion with the standard model.
Care approach
No verified special coating endurance or chemical-care specification is provided, so those claims are not added. Final garment care should consider the complete material system.
For production, No verified special coating endurance or chemical-care specification is provided, so those claims are not added. Final garment care should consider the complete material system.
Frequently Asked Questions
How is it different from the standard slider?
The body and routing geometry are different.
What is the material?
Zamak.
What is the size?
8 mm / 0.31 in.
What is included?
1 double-loop slider.
What is the minimum order?
500 pieces.
Is sample testing needed?
Yes.
Additional production verification
Test the double-loop slider again with the current production tape. If tape lot or stitching method has changed, previous approval should not automatically be considered valid. A short verification sample confirms routing through both loops, nominal size and adjustment behavior before larger quantities are assembled.
Additional production verification
Additional production verification
Additional production verification
Additional production verification
Additional production verification
Additional production verification
Additional production verification
Additional production verification
Production logic of the double-loop body
The double-loop slider routes the strap through two connected openings rather than the conventional slider frame. That geometry changes the path the tape follows, so assembly direction should be confirmed on the approved sample. Sharing the same 8 mm / 0.31 in family with the standard slider does not mean the two models should be threaded in the same way. Recording PIR711008Z together with the Double-Loop Bra Strap Slider component type helps production keep the correct routing method.
Comparing it with the standard slider on a real sample
If a collection is choosing between the standard and double-loop slider, test both models with the same production tape. Compare not only whether adjustment works, but also tape movement, finished metal appearance, fold allowance and stitch position. This avoids a vague claim that one model is universally better and instead shows which body geometry fits the approved garment construction more naturally.
Effect of tape thickness on double-loop routing
The strap changes direction through the double-loop body, so thickness and surface friction can influence adjustment behavior. The nominal 8 mm / 0.31 in size identifies the correct family, but the real tape may be denser, softer or more elastic. Sample testing should confirm that the tape passes through both openings without unnecessary binding, does not bunch after adjustment and does not create excessive bulk near the stitched section.
Fold allowance and stitch position
Folded and stitched areas near the slider determine how much free tape remains for adjustment. If the seam sits too close to the double-loop body, movement can be restricted; if it is too far away, the finished strap may have unnecessary loose length. Recording the approved fold allowance and stitch distance on the technical sheet helps operators reproduce the same adjustment range during repeat production.
How e-buttons should distinguish the model
On e-buttons, PIR711008Z should remain clearly separated from the conventional slider by component type. The Double-Loop Bra Strap Slider name, 8 mm / 0.31 in size and Zamak material give buyers the three main selection points needed to identify the part. Buyers should not rely on a generic 8 mm slider description because the standard and double-loop bodies can share the same nominal width while requiring different routing.
Warehouse identification
PIR710008Z and PIR711008Z share the same nominal size but use different body geometry. If they are stored near each other, bins and boxes should show model code, component type, size and Zamak material. A product image reference can add another visual check. Clear labeling reduces the chance that a standard slider is issued for a style approved with the double-loop version.
First-run production verification
Compare the first completed straps with the approved double-loop reference sample. Confirm that the tape passes through both openings in the intended direction, adjustment behaves consistently and nearby stitching does not interfere with the slider. If the first units differ from the sample, review tape lot, routing direction and fold construction before the full quantity is assembled. This limits the spread of a small assembly error.
Repeat-order discipline
A repeat order should not use only a generic phrase such as “8 mm slider.” Carry PIR711008Z, Double-Loop Bra Strap Slider, 8 mm / 0.31 in and Zamak together on purchase orders, warehouse labels and technical sheets. This makes the approved body form easier to trace and reduces confusion with the conventional slider during later production runs.
Final pre-purchase check
Before ordering, confirm model PIR711008Z, double-loop body form, 8 mm / 0.31 in size and Zamak material. One sales unit contains one double-loop slider and the minimum order is 500 pieces. Sample the actual production tape and verify which ring or other connection component is also required by the garment. This sequence keeps the buying decision tied to the approved construction.