10 mm / 0.39 in Zamak Bra Strap Hook PIR750010Z

10 mm / 0.39 in Zamak Bra Strap Hook is Zamak hardware used to complete strap connections.

Product function

The hook completes a connection in the strap system. It does not perform the same job as a ring or slider. It should be evaluated together with the strap tape and the intended mating point. Correct production use depends on connection geometry, stitch position and strap direction under tension.

Production note: The hook completes a connection in the strap system. It does not perform the same job as a ring or slider. It should be evaluated together with the strap tape and the intended mating point. Correct production use depends on connection geometry, stitch position and strap direction under tension.

10 mm / 0.39 in size family

The nominal size identifies the hardware family. Two strap tapes with the same stated width can differ in thickness, elasticity and edge construction. The size label alone is therefore not a universal fit guarantee. Test the actual production tape and mating connection on the approved sample.

Production note: The nominal size identifies the hardware family. Two strap tapes with the same stated width can differ in thickness, elasticity and edge construction. The size label alone is therefore not a universal fit guarantee. Test the actual production tape and mating connection on the approved sample.

Zamak material

The product is classified as Zamak. Keeping material, size and component type as separate attributes improves category filtering. The same size family can include rings, sliders, hooks and sets. No unverified claims are added about plating, corrosion resistance, wash performance or chemical durability.

Production note: The product is classified as Zamak. Keeping material, size and component type as separate attributes improves category filtering. The same size family can include rings, sliders, hooks and sets. No unverified claims are added about plating, corrosion resistance, wash performance or chemical durability.

Applications

The hook can be considered for bras, bralettes, bikinis, swimwear, bodysuits and similar narrow-strap garments. Not every construction requires a hook. The approved strap design determines whether the part is needed and how it should be oriented.

Production note: The hook can be considered for bras, bralettes, bikinis, swimwear, bodysuits and similar narrow-strap garments. Not every construction requires a hook. The approved strap design determines whether the part is needed and how it should be oriented.

Difference from ring and slider

The hook completes a connection. The ring creates a connection or direction-change point. The slider changes strap length. Sharing the same nominal size does not make these parts interchangeable. Purchasing, warehouse and production teams should use the exact component names.

Production note: The hook completes a connection. The ring creates a connection or direction-change point. The slider changes strap length. Sharing the same nominal size does not make these parts interchangeable. Purchasing, warehouse and production teams should use the exact component names.

Live related products

Use the live Bra Rings, Hooks and Strap Adjustment Buckles category as the main comparison path. The live 10 mm / 0.39 in slider, 10 mm / 0.39 in ring and 10 mm / 0.39 in 3-piece set show different functions and buying formats within the family.

Production note: Use the live Bra Rings, Hooks and Strap Adjustment Buckles category as the main comparison path. The live 10 mm / 0.39 in slider, 10 mm / 0.39 in ring and 10 mm / 0.39 in 3-piece set show different functions and buying formats within the family.

Sample testing

Engage the hook with the intended mating point in the real routing direction and test the strap under tension. Check for excessive play, poor engagement and interference with nearby stitches. A flat-table check is not enough; review the strap at the angle it uses on the finished garment.

Production note: Engage the hook with the intended mating point in the real routing direction and test the strap under tension. Check for excessive play, poor engagement and interference with nearby stitches. A flat-table check is not enough; review the strap at the angle it uses on the finished garment.

Technical sheet

Record model product, component type Bra Strap Hook, 10 mm / 0.39 in size family, Zamak material and package content. Recording the strap tape and mating component on the same technical sheet makes the approved system easier to reproduce.

Production note: Record model product, component type Bra Strap Hook, 10 mm / 0.39 in size family, Zamak material and package content. Recording the strap tape and mating component on the same technical sheet makes the approved system easier to reproduce.

Bulk production

Compare the first completed straps with the approved sample. Hook angle, engagement and strap direction should remain consistent. If behavior changes later in the run, review the tape lot, mating component and assembly orientation together.

Production note: Compare the first completed straps with the approved sample. Hook angle, engagement and strap direction should remain consistent. If behavior changes later in the run, review the tape lot, mating component and assembly orientation together.

Package content and minimum order

One sales unit contains one hook. The minimum order is 500 pieces. Package content describes what is physically included in one unit, while minimum order defines how many units can be ordered. Production demand should be calculated from hooks used per finished garment.

Production note: One sales unit contains one hook. The minimum order is 500 pieces. Package content describes what is physically included in one unit, while minimum order defines how many units can be ordered. Production demand should be calculated from hooks used per finished garment.

Purchasing checks

Before ordering, verify model code, component type, size, material, package content and minimum order quantity. Confirm the mating connection in the technical specification. A visually similar part should not be assumed to perform the same function.

Production note: Before ordering, verify model code, component type, size, material, package content and minimum order quantity. Confirm the mating connection in the technical specification. A visually similar part should not be assumed to perform the same function.

Warehouse management

Hooks, rings, sliders and sets should remain under separate model codes. Small hardware pieces can look similar, so shelf labels should show both component type and model code. This reduces picking errors and repeat-order confusion.

Production note: Hooks, rings, sliders and sets should remain under separate model codes. Small hardware pieces can look similar, so shelf labels should show both component type and model code. This reduces picking errors and repeat-order confusion.

Signs of a mismatch

If the hook does not engage correctly, rotates excessively, pulls the strap out of alignment or looks out of proportion, review the connection geometry. The cause may also be the mating part, tape thickness or stitch placement.

Production note: If the hook does not engage correctly, rotates excessively, pulls the strap out of alignment or looks out of proportion, review the connection geometry. The cause may also be the mating part, tape thickness or stitch placement.

Quality control

Check the hook for visible deformation, confirm the same connection direction as the approved sample and review behavior while the strap moves. Quality control is more reliable when performed on the completed strap system.

Production note: Check the hook for visible deformation, confirm the same connection direction as the approved sample and review behavior while the strap moves. Quality control is more reliable when performed on the completed strap system.

Repeat orders

Use model product together with component type, size and Zamak material rather than a generic phrase such as 10 mm hook. Similar-sized components can exist in the same category, so model-code continuity matters.

Production note: Use model product together with component type, size and Zamak material rather than a generic phrase such as 10 mm hook. Similar-sized components can exist in the same category, so model-code continuity matters.

Production planning

The number of hooks used per garment directly affects total accessory demand. If several sizes or colors use the same approved hook, demand can be consolidated. Do not assume a different finish or mating geometry is the same stock item unless verified.

Production note: The number of hooks used per garment directly affects total accessory demand. If several sizes or colors use the same approved hook, demand can be consolidated. Do not assume a different finish or mating geometry is the same stock item unless verified.

Care and handling

No verified special coating endurance, corrosion rating or chemical-care specification is provided, so those claims are not added. Final garment care should consider fabric, elastic, finish and all hardware components together.

Production note: No verified special coating endurance, corrosion rating or chemical-care specification is provided, so those claims are not added. Final garment care should consider fabric, elastic, finish and all hardware components together.

Final verification

Before a large order, compare the approved sample with current production materials. If the tape or mating component has changed, previous approval should not automatically be treated as valid. A short verification sample can confirm connection direction and size relationship.

Production note: Before a large order, compare the approved sample with current production materials. If the tape or mating component has changed, previous approval should not automatically be treated as valid. A short verification sample can confirm connection direction and size relationship.

Frequently Asked Questions

What size family is the hook in?

10 mm / 0.39 in.

What is the material?

Zamak.

What is included?

1 hook.

What is the minimum order?

500 pieces.

Is it the same as a ring?

No.

Is sample testing needed?

Yes, test the real connection.

Additional production check

Test the hook and mating connection again with the current production tape. A short sample helps confirm size, direction and connection geometry before larger quantities are assembled. Using the same model code on technical sheets and warehouse labels supports production continuity.

e-buttons production check for the hook

product is the single Zamak hook in the 10 mm / 0.39 in family. The nominal size identifies the correct hardware class, but final approval should also review the actual strap tape, stitch position and mating connection. On the completed sample, the hook should engage in the intended direction without excessive rotation or pulling the strap out of alignment. e-buttons keeps component type, size and material as separate selection points so buyers can distinguish the hook from rings, sliders and set products. Repeat orders should carry the same model identification across purchasing, warehouse labels and technical sheets.

Single hook versus a 3-piece set

One sales unit of this product contains one physical hook and the minimum order is 500 pieces. The 3-piece set in the same family contains a slider, ring and hook in one sales unit. If those components are not consumed in the same ratio, single-component sourcing can keep inventory closer to the real bill of materials. Warehouse counting should therefore distinguish single pieces from set quantities and avoid treating them as equivalent stock units.