15 mm / 0.59 in Zamak Bra Strap Slider, Ring and Hook 3-Piece Set PIR770015Z

15 mm / 0.59 in Zamak Bra Strap Slider, Ring and Hook 3-Piece Set combines one slider, one ring and one hook in a 15 mm / 0.59 in Zamak lingerie-hardware set. Final approval should use the actual production strap and the complete approved garment construction.

What the 3-piece set includes

15 mm / 0.59 in Zamak Bra Strap Slider, Ring and Hook 3-Piece Set combines one bra strap slider, one ring and one hook in a single sales unit. The slider adjusts usable strap length, the ring creates a connection or direction-change point, and the hook completes a connection where the design requires one. On e-buttons, the three components should be approved together with the actual production tape because textile construction can affect each part differently.

Metric and imperial sizing

The English listing keeps the original 15 mm metric reference and adds 0.59 in for US purchasing teams. Both values describe the same nominal family. Two tapes sold under that width can still differ in finished width, edge firmness, thickness and stretch. The size narrows the catalog, but physical approval should use the actual production tape because slider movement, ring angle and hook engagement can all change with construction.

Zamak material

All three components are classified as Zamak. The material field answers a different sourcing question from size or component function. No unsupported claim is made about coating thickness, corrosion resistance, saltwater performance or wash endurance. If a project requires a defined finish standard, that requirement should be confirmed separately before production rather than inferred from the base material.

Three different functions in one set

The slider, ring and hook perform different jobs in the strap system. The slider controls usable length, the ring creates a connection or direction-change point, and the hook completes a connection. Because the parts are supplied together, production should still verify the location and orientation of each one on the approved sample. Sharing one sales unit does not make their functions interchangeable.

Bras and bralettes

When a bra or bralette design uses all three hardware functions in the same strap construction, the 3-piece set can simplify purchasing and warehouse picking. Not every garment uses the same layout, so nominal size alone is not enough. Review adjustment range, ring angle, hook engagement, fold allowance and seam position on the approved sample, then record the arrangement on the technical sheet.

Swimwear and bikini straps

Swimwear elastic can narrow, stretch or change angle under load. This can affect slider movement, ring orientation and hook engagement at the same time. Review the sample relaxed and under light tension that resembles actual use. This is a practical production-fit check, not a claim about corrosion, saltwater or coating durability.

Difference from the 2-piece set

The 2-piece set contains a slider and ring only. This 3-piece set adds a hook. When the garment consistently uses all three components, the 3-piece format can simplify purchasing and picking. If the hook is not part of the construction, the 2-piece set or single components can avoid unnecessary inventory. The correct format follows the actual bill of materials.

Single components versus the 3-piece set

A 3-piece set can be efficient when the slider, ring and hook are always consumed in the same ratio. If one component is used more frequently across other styles, single-component inventory may provide better flexibility. Buyers should compare physical consumption, production plans and warehouse logic before deciding between a complete set and separate items.

Compare the hardware family

Use the Bra Rings, Hooks and Strap Adjustment Buckles category to compare single components, the 2-piece set and the 3-piece set. Start with function and package format, then narrow by 15 mm / 0.59 in size and Zamak material. This reduces the chance of choosing the correct nominal width but the wrong set structure.

Sample all three components with the real tape

Use the actual production tape and build the complete strap section. Confirm slider movement, ring orientation and hook engagement in one sample. Look for binding, bunching, excess play, rotation or an unstable connection. Reviewing all three parts together reveals interactions that cannot be judged by measuring each component separately and gives production a stronger approval reference.

Fold allowance and stitch placement

Tape may be folded and stitched differently near the slider, ring and hook. Folded layers create more thickness than one flat layer. A seam too close to the slider can restrict adjustment, while a seam too close to the ring or hook can change connection geometry. Record approved fold allowances and stitch positions so production can reproduce the same complete strap construction.

When the tape supplier changes

A new supplier or production lot can change thickness, stretch, edge firmness or surface friction without changing the nominal 15 mm / 0.59 in label. Previous approval should not automatically be treated as valid. Make a short verification sample and compare slider movement, ring angle, hook engagement and seam relationship before releasing the full quantity. This can detect changes early and reduce rework.

First-run production verification

After sample approval, compare the first completed production straps with the reference. Slider orientation, ring position, hook engagement, tape path and stitch distances should remain consistent. If the first units sit differently, review the tape lot and assembly method before the entire order is completed. The complete strap system is a more useful troubleshooting reference than any one component alone.

Technical sheet and bill of materials

The technical sheet should record 3-Piece Bra Strap Slider, Ring and Hook Set, the 15 mm / 0.59 in size family, Zamak material and the physical contents of one sales unit. It should be clear that one set equals one slider, one ring and one hook. The approved strap tape and mating points should also have sourcing references where possible.

Warehouse separation and counting

A 3-piece set is one sales unit but represents three physical components. Warehouse labels should show set type, 15 mm / 0.59 in size and Zamak material. Single sliders, rings and hooks should remain separate inventory records. During counting, 500 sets represent 500 sliders, 500 rings and 500 hooks, or 1,500 physical components in total.

Package content and minimum order

One sales unit contains one bra strap slider, one ring and one hook. The minimum order is 500 sets. Package content and MOQ describe different things: package content states what is included in one set, while MOQ defines how many sets can be ordered. Production planning should convert set quantity into physical component requirements when comparing inventory or consumption.

Production quantity planning

Total demand depends on how many sets are used in each finished garment. A style using two complete strap systems can consume more than a design using one set. Requirements can be consolidated when several sizes or colorways use the same approved set. Different sizes, materials or set structures should remain separate inventory items so reorder points reflect real demand.

Signs that selection should be reviewed

Binding at the slider, unstable ring angle, poor hook engagement, bunching or an unbalanced finished strap can indicate that the set-tape relationship should be reviewed. These symptoms do not automatically mean a metal component is defective. Tape thickness, elasticity, folded construction and stitch position can create similar effects. Compare the production piece with the approved sample before making substitutions.

Quality-control points

Quality control should review all three components together. Check slider movement, ring angle, hook engagement, tape direction, seam locations and final visual balance against the approved sample. If behavior changes later in production, compare tape lot and assembly method before assuming that the hardware has changed. This system-level review makes corrective action more closely tied to the real cause.

Repeat-order discipline

Repeat orders should not rely on a generic phrase such as 15 mm set. Carry 3-Piece Bra Strap Slider, Ring and Hook Set, 15 mm / 0.59 in size, Zamak material and package content consistently across purchase orders, warehouse labels and technical sheets. Clear naming helps later production teams identify the same approved set and reduces confusion with single components or the 2-piece set.

Care and finish boundaries

The final care behavior of hardware depends on more than the base material. Finish, garment dye, cleaning chemistry and surrounding textiles can all influence the result. Because no specific coating-performance or corrosion-test value is stated here, the page does not make a blanket durability claim. Final garment care instructions should be established for the complete product and special requirements validated under intended conditions.

Archive the approved sample

Keeping an approved physical strap sample or clear reference image after production helps future repeat orders. When the style returns, teams can compare the current slider-ring-hook arrangement, tape routing and seam relationship with the previous reference instead of relying only on an old purchase name. This is especially useful when single parts and several set formats share the same nominal size.

Final pre-purchase review

Before ordering, confirm 3-Piece Bra Strap Slider, Ring and Hook Set, 15 mm / 0.59 in size, Zamak material, one-slider-one-ring-one-hook package content and the 500-set minimum order. Sample the actual production tape and complete connection. Keep the same product description on the purchase order, technical sheet and warehouse record.

Frequently Asked Questions

What is included in one set?

1 bra strap slider, 1 ring and 1 hook.

What is the material?

Zamak.

What is the size?

15 mm / 0.59 in.

What is the minimum order?

500 sets.

How is it different from the 2-piece set?

The 3-piece set also includes the hook.

Should the set be sample-tested?

Yes, with the actual production strap and complete connection.