Menu
Menu
Your Cart

1.5 mm / 0.06 in Workshop Hole Punch for Fabric, Leather & Canvas PDV00015DEL

Precision 1.5 mm / 0.06 in Circular Hole Preparation

Size Selection, Material Use and Press Compatibility

1.5 mm (0.06 in) hole cutter helps prepare accurately sized circular openings in suitable workshop materials. Check accurate sizing for small openings, then verify machine compatibility before ordering.

3.82 USD
Ex Tax: 3.18 USD
  • Stock Quantity: In Stock
  • Model: PDV00015DEL

Product Reviews

No reviews yet. Be the first to write a review!

Q&A

Total Questions 0 Answered 0 Unanswered 0

1.5 mm / 0.06 in Hole Cutter: Choose by Actual Diameter

1.5 mm / 0.06 in workshop hole punch is designed for repeatable circular hole preparation in compatible materials. It helps create the required opening before hardware installation and gives buyers a clear size reference based on real cut diameter. It is a cutting tool, not a setting die.

An oversized hole can leave unnecessary play around hardware, while an undersized hole can stretch or distort the material. Check the real post, tube, pin or inner-diameter requirement of the component before selecting the cutter.

Typical Applications

  • Fabric and textile accessory production
  • Leather and synthetic leather
  • Canvas, bags, belts and workshop accessories
  • Pre-punching before compatible hardware installation
  • Sampling, repair and repeat production

Cutting and Setting Are Separate Operations

The cutter removes material to prepare the opening. A setting die forms or secures the hardware after the hole is ready. Do not assume that matching trade numbers guarantee compatibility; actual hardware dimensions remain the safer selection reference.

Tool Construction and Connection

This size follows the small punch family with a cutter and lower anvil. Existing M6 and 1/4 in connection options are retained; verify the physical thread before ordering.

Material Thickness and Test Cuts

Thin woven fabric, dense leather, multilayer canvas and coated materials react differently under pressure. Thickness, stiffness, stretch and layer count affect edge quality. Test the actual production material before repeat work.

Press Compatibility

Use with a compatible hand striking holder, manual press, impact press or suitable powered system when M6 or 1/4 in connection and working geometry match.

Cut Quality and Tool Care

  • Do not strike the cutting edge against bare metal.
  • Keep the lower support clean and level.
  • Align the punch as squarely as possible to the material.
  • Use controlled pressure on thick or multilayer materials.
  • Inspect the edge if fraying or incomplete cuts appear.

Common Selection Mistakes

Choosing by hardware name alone can lead to the wrong opening. Start with the required finished hole diameter, then confirm material thickness and the hardware geometry that will pass through the material.

Who Uses This Tool?

Useful for textile and leather workshops, bag and accessory production, sample rooms, repair work and makers who need controlled circular openings. Standardizing the test-cut process can improve repeatability in small production runs.

Product-Family Guidance

Compare additional diameters and sets in the Hole Cutter Tools and Punching Dies category. Keep cutting tools separate from setting dies so each tool is selected by its real production task.

Before Ordering

  • Required hole: 1.5 mm / 0.06 in
  • Material thickness and stiffness
  • M6 or 1/4 in connection
  • Actual hardware dimensions
  • Separate setting die when hardware will be installed

Frequently Asked Questions

What hole diameter does this tool create?

The actual cutting diameter is 1.5 mm / 0.06 in.

Is this a setting die?

No. It prepares the opening only; hardware installation requires a separate compatible setting die.

Which materials can it be used on?

It can be used on compatible thicknesses of thin leather, synthetic leather, fabric, cardboard, tags and small accessory parts.

How do I choose the connection?

Choose M6 or 1/4 in according to the physical connection on your press.

What does 1.5 mm mean?

It is the actual target hole diameter, approximately 0.06 in.

Included Backing and Compatible Presses

A brass anvil is supplied with this 1.5 mm (0.06 in) hole punch. Its compatible press models are M0099 and M00100. Verify your machine's connection option; select a separate setting die for the hardware installation step.

Product Information
Compatible Product GroupHardware Requiring a 1.5 mm Hole
Drilling Diameter1.5 mm / 0.06 in
ModelHole Cutter No. 1.5
NotesNot a setting die; used only for hole punching and surface preparation
Transaction TypeHole Punching / Circular Cutting
Usage SurfaceLeather / Fabric / Cardboard / Compatible Materials
Sales MethodCutter and Lower Anvil
Working Method / Press CompatibilityHand Striking Tool / Manual Press / Impact Press / Electric / Pneumatic
Product TypeHole Cutter
SIZE / DIMENSION
Size mm / Ligne1.5 mm / No. 1.5
Size / Number1.5 mm / 0.06 in
MATERIAL
MaterialSteel
Purpose
PurposeHole Punching / Pre-Installation Hole Preparation

Dear Customer,

We aim to ensure you have the best experience with your order process. Please note that the prices listed apply to standard color options. If you prefer different colors, enamel finishes, or stone embellishments, a price adjustment will be made based on the cost of the additional materials.

The quoted price applies to the unit shown next to the product (package, gross, meter, or piece). For retail orders, please keep the following rules in mind:

  1. Piece Sales: If the product is sold by the piece and your order is for 500 pieces or less, we will ship from available stock colors. To access a wider range of options, we kindly ask that you meet the minimum quantity requirement listed on the product page.

  2. Package or Gross Sales: If the product is sold by package or gross, for 1 package or gross or less, we will also ship from available stock colors.

For both scenarios, our team will contact you via phone or other communication channels to confirm your color and quantity preferences.

For orders of 5000 pieces or more, we can apply your preferred custom color. Please note that there may be a delay of 3-4 business days for production, depending on the product type.

For large orders of 20,000 pieces or more, please contact us for special pricing.

If you’re interested in custom colors, enamel finishes, or stone-embellished products outside of our standard color options, please refer to the Special Coating Colors section or reach out to us directly.

For bulk orders, we offer customization with your company’s logo or tailored designs. Please contact us to discuss your unique needs.

Important Note: Due to lighting variations during photography, there may be slight differences in color between the product images and the actual product.

For international orders, DHL shipping fees will apply. Please contact us for details regarding shipping costs and further information.

Domestic Delivery

  • Your orders will be delivered by the shipping company on the estimated delivery date provided.
  • Shipping fees are determined based on agreements made with the shipping companies.
  • Orders placed before 3 PM will be dispatched on the same day.

Returns

  • You can return any purchased item, provided it meets our return policy criteria, within 15 days of the delivery date. Please note, the shipping cost for returns is the responsibility of the customer.
  • For more detailed information regarding delivery and returns, please visit our Frequently Asked Questions (FAQ) page.

International Shipping Information

We proudly offer worldwide shipping for our products.

Payment Methods:

  • We cater to both retail and wholesale customers. Prices are available in Turkish Lira (TRY), US Dollars (USD), and Euros (EUR).
  • Currently, we accept credit card payments for all international transactions.
  • Please note, failing to pay via credit card may delay your order processing, as we will need to receive payment and issue an invoice before shipping your order.

Shipping Costs:

  • Shipping fees are calculated in real-time using DHL’s international shipping calculator, based on your selected shipping method, location, and the weight of your order. You will be able to review the exact shipping costs after entering your personal information at checkout, before completing the purchase.

Customs and Duties:

  • Please be aware that customs duties and taxes may apply to your order, depending on your country’s regulations. Our system cannot calculate these charges.

Shipping Methods:

  • We offer Yurtiçi Cargo for domestic shipments within Turkey and DHL Express for international deliveries. If you are a business requiring additional options through DHL, please contact our Customer Service team for assistance.
  • DHL services may have country-specific weight and size restrictions, which our system may not always detect. We recommend keeping an eye on your email for updates regarding your order, especially for wholesale purchases.

Important Notes:

  • Ensure you select the appropriate shipping method for your location. If you are located outside the US or the European Union but choose shipping options meant for these regions, the correct shipping fees will be calculated and shown at checkout.
  • Once the order has been dispatched, E-Buttons.com is not responsible for any delays or losses related to international shipping.
  • While DHL Express will expedite your package to the nearest customs facility, we have no control over how long it will take for your package to reach you after leaving Turkey.

You can track your package using the DHL Tracking Code provided after shipping. Please note that if the package is not officially marked as lost or damaged according to your country’s postal regulations, we are unable to resend it. In such cases, we will initiate an insurance claim, and only after the claim is approved will the products be re-sent.