6 mm metal hook-and-eye clasp – E 1858
Fastening choice for the garment
When a visible button would interrupt the look of a garment, E 1858 offers a hook closure option for narrow closure areas on selected skirts and pants. Select it for its actual shape and measurements, not simply because another clasp in the range has a similar width.
Where it earns its place
The value to a sewing room is a predictable fastening position. A correctly placed hook helps align the garment edges and reduces the need to move a closure after the lining has been attached. Its compact footprint can suit a limited fastening allowance.
Measurements that matter
Verified product measurements: 6 mm (0.24 in) nominal size; 6.4 mm (0.25 in) width; 13 mm (0.51 in) overall length; 4.8 mm (0.19 in) hook height. These figures refer to different parts of the component. The nominal width is not a statement of tensile strength, and the overall length must be considered when positioning the fastening behind the garment edge.
Pattern and fit decisions
On a sample blazer or dress, close the garment and observe whether the front edges meet without twisting. Mark the actual attachment position on the pattern only after confirming the receiving piece fits. Leave enough room for seam allowances, lining and the hook's movement.
Working with fabric and lining
Choose stitches and backing support to suit the actual fabric wherever the product has a sewing area. Check that a lining or facing does not get caught by the hook. For versions without a verified fixing method, inspect the component before selecting tools; do not assume a press die is suitable.
Matching the receiving part
The receiving eye or counterpart is a functional part of the closure. Match its shape to the hook, then test repeated opening and closing on the real garment. Components from other model numbers are not automatically interchangeable, even when their nominal dimensions look similar.
Selecting a finish and quantity
For a coordinated production run, compare the available metal finish with buttons, zipper pulls and other trim on a physical sample. Review the current colour and pack options on E-Buttons; pictured variants do not establish availability. Keep an approved sample as the reference for repeat orders.
Practical comparison with alternatives
A smaller clasp may be easier to hide but may not fit the required eye or seam construction. A wider clasp takes more space. Compare sewing area, overall length and hook height together; a larger component should not be treated as automatically stronger.
Questions buyers ask
Is 6 mm the entire clasp length? Check the measurement list above; width and overall length are separate. Will any receiving eye work? No, confirm the actual fit. Is it right for heavy outerwear? Only after testing the finished garment. Can I press-set it? Do not assume press compatibility without a verified attachment method.
Choosing and Sewing the Right Closure
For E-Buttons customers, the E 1858 6 mm metal hook clasp is best selected by comparing the hook geometry and finished garment layers. The verified measurements are 6 mm (0.24 in) nominal size, 6.4 mm (0.25 in) width, 13 mm (0.51 in) overall length and 4.8 mm (0.19 in) hook height. A compatible receiving eye, appropriate needle and thread, and fabric backing where necessary are the relevant supplies; a setting press is not required. The eye's inclusion in the package has not been confirmed.
Questions to Check Before Ordering
Does the E 1858 need a setting press?
This is a sew-on style fastening; use suitable needle and thread rather than an eyelet or snap setting press. Check the actual attachment points on the sample.
Is a matching eye included?
The supplied package contents are not verified here. Check the current listing or ask before ordering a matching receiving eye.
How do I check the size?
Compare the 6 mm (0.24 in) nominal size, 6.4 mm (0.25 in) width, 13 mm (0.51 in) overall length and 4.8 mm (0.19 in) hook height with your pattern and finished fabric layers. Width, overall length and hook height describe different measurements.
Will any receiving eye fit?
No. The eye's shape, opening and placement must be tested with the actual hook before production.
Which garments suit this clasp?
It may suit compatible skirts and trousers with narrow closure allowances; confirm the fabric construction, seam allowance and closure position on a finished sample.
Can I use it without reinforcing the fabric?
That depends on the fabric and garment design. Where needed, use suitable backing or interfacing and test the stitching.
_7_11zon.jpg-230x230.webp "10 mm / 0.394 in Ball-Tip Sew-On Hook Fastener, 50 Pieces E 1879 PROMO")
.jpeg-230x230.webp "7.5 mm / 0.30 in Zamak Metal Sew-On Hook & Eye Closure, 100 Pieces E1762PROMO")
