70 cm / 27.56 in T6 Molded Sweatshirt Zipper, Two-Way Open-End Separating EPR0070T6C

Where Is a 70 cm / 27.56 in T6 Sweatshirt Zipper Used?

A 70 cm / 27.56 in T6 molded sweatshirt zipper is used in hoodies, sweatshirts, jackets, cardigans, vests and lightweight outerwear.

The two-way open-end structure allows the garment front to separate completely while also letting the lower part of the zipper open when needed.

Two-Way Open-End Structure

A two-way open-end zipper has two sliders and a separating bottom system. The zipper sides can come apart at the bottom, and the two sliders allow the front opening to be controlled from different points.

This structure is useful in longer hoodies, jackets, cardigans and vests where the bottom section may need to open while the upper section remains closed.

70 cm / 27.56 in Zipper Length

The 70 cm / 27.56 in length can be used for adult hoodies, full-front sweatshirts, light jackets, sports jackets, cardigans and vests.

When selecting the zipper, the real front opening line, neckline start point, lower edge, rib area and seam allowance should be measured together.

T6 Molded Zipper Group

This product belongs to the T6 zipper group. It is listed as a molded sweatshirt zipper and can be used where a sporty and visible zipper line is preferred.

The molded zipper appearance works well on hoodies, sweatshirts, casual jackets and lightweight outerwear.

White 100 Zipper Tape

The product is listed with White 100 zipper tape color. White zipper tape works well with white, ecru, light grey, pastel tones and light-colored sweatshirt fabrics.

Sewing and Product Selection

During sewing, both zipper tapes should align evenly from the neckline to the lower edge. The bottom separator should sit correctly so both sliders can move smoothly.

For zipper replacement, the existing zipper should be measured from the top stopping point to the bottom separating part. For new production, the real front opening line on the pattern should be used.

Product Type Clarification

This product is a two-way open-end sweatshirt zipper. It is different from a closed-end zipper, invisible zipper, trouser zipper, pocket zipper, zipper chain by the meter or single-slider open-end zipper.

For pockets, trousers and fixed-bottom openings, a closed-end zipper should be selected. For a fully separating front with one slider, a single-slider open-end zipper can be used.

Common Questions Before Ordering

Is this zipper two-way?

Yes. It has two sliders and a separating bottom structure.

What is the zipper length?

The zipper length is 70 cm / 27.56 in.

Which zipper type is it?

It belongs to the T6 zipper group.

What is the zipper tape color?

The available zipper tape color is White 100.

Can it be used for hoodies?

Yes. It can be used for adult hoodies and full-front sweatshirts.

Can it be used for jackets and cardigans?

Yes. It can be used in jackets, cardigans, vests and lightweight outerwear.

What is the difference from a single-slider open-end zipper?

Both can separate at the bottom, but this zipper has two sliders. A single-slider open-end zipper usually has one slider.

Is it suitable for pockets or trousers?

For pockets, trousers and fixed-bottom openings, a closed-end zipper should be selected. This product is a two-way open-end zipper.

What is the minimum order quantity?

The minimum order quantity is 5 pcs.