Neon Pink Snap Buttons 17 mm (0.67 in)

Because there are different types, sizes, and shapes of snaps available, choosing the right snap button for your project can be difficult. Here are some tips to help you choose and add snaps correctly:

First you need to consider the type of fabric you are working with.
Secondly, you need to measure the diameter of the snap and the thickness of the fabric.
Third, you need to choose the right tool for installing the snap.
Fourth, you need to mark the position of the snap on the fabric.
Fifth, you need to install the snap by following the application steps.

Descriptions

Build a Bold Trim Detail With Neon Pink Snap Buttons

On a dark jacket placket or a sewn accessory, a neon pink snap cap can provide a visible punctuation of color without switching the fastening to a different mechanism. The outer 17 mm (0.67 in) cap is plastic; the socket, stud, and post underneath use a 54 System S-spring construction and have a nickel-colored stainless metal finish. The visible cap measures nominal 27 ligne, while the metal mating parts belong to a 12 mm family. Check both components before specifying tooling.

Match Cap Shade, Fabric and Hardware

Neon pink is a high-contrast accent against black, charcoal, and navy fabrics. For a collection with color-blocked trims, inspect the cap under your workshop lighting and compare it with thread, binding, or printed fabric samples. Explore other plastic snap button colors if a quieter finish is needed. If the project calls for another fastening style, browse snap fastener systems rather than assuming the same cap diameter guarantees component compatibility.

Know Exactly What's in the Pack

One pack supplies 100 neon pink plastic caps, 100 stainless metal sockets, 100 studs, and 100 posts. Those 400 components form 100 complete four-part snap closures. The outer cap is 17 mm (0.67 in), nominal 27 ligne. The socket diameter is listed at 12 mm (0.47 in), with the stud and post outside diameters listed at approximately 10.6 mm (0.42 in).

Setting Die and Fabric Tests

The related KLP0054-17 54 System setting die is catalogued for matching 17 mm plastic-cap snaps. KLP0080 is a separate custom tooling option where the cap profile requires it. Neither a setting die nor a press comes in the snap package. Confirm the upper cap seat, metal mating pieces, and press connector. Test on the actual finished fabric layers before production, looking for cap marking, puckering, and proper closure engagement. Do not assume verified wash resistance or safety certification without specific test documents.

Product Specifications

Cap	17 mm (0.67 in), nominal 27 ligne; neon pink plastic
System	54 System S-spring / 12 mm (0.47 in) socket
Mating parts	Nickel-colored stainless metal
Pack	100 complete sets / 400 components
Setting	KLP0054-17 family; die and press not included

Frequently Asked Questions

Does the pack contain 100 complete snap fasteners?

Yes. The package contains 100 complete four-part closures, or 400 components.

Which parts make one closure?

A neon pink plastic cap, metal socket, metal stud, and metal post.

What is the visible cap diameter?

17 mm (0.67 in), nominal 27 ligne.

Are the three mating pieces also pink?

No. The plastic cap is neon pink; the stainless metal mating pieces are nickel-colored.

Which snap system is used?

The matching metal components are 54 System S-spring parts.

Is a setting die included?

No. Setting dies and presses are separate purchases.

Which setting die should I check?

KLP0054-17 is catalogued for the 17 mm 54 System snap family. Confirm the cap profile and press interface before ordering.

Specification

Product Information
Sales Method	Packet
Product Type	Plastic Cap Snap Fastener
SIZE / DIMENSION
General Product Size	17 mm / 27 ligne
Size mm / Ligne	17 mm / 27L / 0,67''
Dimensions	Plastic cap: 17 mm (0.67 in), nominal 27 ligne. Socket diameter: 12 mm (0.47 in). Stud outer diameter: 10.6 mm (0.42 in). Post diameter: 10.6 mm (0.42 in).
Snap Information
Snap Fastener System / Model	54 System / Standard 54
Application
Application / Installation	Applied with a press and the compatible installation die.
Setting Die	17 mm Snap Setting Die KLP0054-17
Mounting Method	Dies Tools
Compatible Die	KLP0054-17: setting die for 17 mm (0.67 in) / 54 System snaps. KLP0080: custom cap-profile die option; confirm press connection before ordering.
Cap Information
Cap Size	17 mm / 27L
Cap Type	Plastic Cap
Cap Material	Plastic
Cap Color	Neon Pink
3 Bottom Parts Information
3 Bottom Parts System	54 System
3 Bottom Parts Material	Stainless Steel
Bottom Parts Color	Nickel
MATERIAL
General Product Material	Stainless Steel
Material	Stainless
Usage Area
Most Frequently Used Area	The 17 mm 54 system plastic-covered, stainless steel base domed snap fastener is preferred for providing a strong closure in jackets, coats, vests, bags, accessories, and medium-thick fabric applications. The plastic domed cover structure gives the product a more decorative, fuller, and softer look, while the stainless steel base increases its durability. It offers both a functional and aesthetic snap fastener solution, especially in outerwear, children's products, bag details, and textile accessories.
Colors
Color / Finish	Antique Brass, Nickel, Black
Colors	The lower parts are nickel-free and can be shipped in antique yellow, gun metal color, or black oxide color options upon request.
Kinds of Selling
Purchase Type	Retail
Content Information
Package Included	100 neon pink plastic caps + 100 sockets + 100 studs + 100 posts = 100 complete sets / 400 components. Setting die and press not included.

Often Bought Together

On sale

15 mm Snap Button Color and Finish Test Set – 4 Color Snap Packs + KLP0015 Mounting Die Included – Hand Press Not Included SET-15MM-CITCIT-400

A practical 15 mm snap button color and finish test set for workshops, tailors and apparel brands. Compare silver, smoke / black nickel, antique brass..

22.91 USD 29.51 USD

Ex Tax:20.83 USD

Add to Cart

Add to Wish List Compare this Product

Snap Button Setting Die for 17 mm / 0.67 in Plastic Cap 54 System Snap Buttons KLP0054-17

This 17 mm / 0.67 in snap button setting die is designed for plastic cap 54 system snap buttons, especially alpha plastic cap snap models used on garm..

4.30 USD

Ex Tax:3.58 USD

Add to Cart

Add to Wish List Compare this Product

15 mm Plastic Capped Snap Fastener Color Sample Set – 25 Colors, 625 Sets SET15PL25RENK

Compare 25 physical colors before selecting snap fasteners for a garment, accessory, or production order. This sample set includes 25 sets of each col..

47.92 USD

Ex Tax:43.56 USD

Add to Cart

Add to Wish List Compare this Product

On sale

12.5 mm Stainless Snap Button Set – 4 Colors, 400 Pieces + 54 System Wedge Mounting Die Included – Hand Press Not Included CITCIT-SET-125MM-4RENK-KLP0056

A practical 12.5 mm stainless snap button set with 4 popular finishes and the compatible mounting die included. This set contains silver, black oxide,..

21.74 USD 23.61 USD

Ex Tax:19.76 USD